How do I access my Motorola router settings?

To access the settings of your WiFi modem:

1. Open a web browser (Internet Explorer, Firefox, Safari, Chrome, etc.)
2. In the address bar, type: 192.168.0.1 [Then press the Enter Key]
3. Enter Username*: admin.
4. Enter Password*: motorola.
5. Click Login.
6. Click the Wireless menu and then click on Primary Network Settings.

Why won’t my Motorola modem connect to the Internet?

If you are having troubles connecting to the internet, first try to reset the modem by unplugging the power cord from the modem and wait 1 to 2 minutes. When the modem lights come back on restart your computer or if your modem is connected to a router unplug your router for 30 seconds and plug it back in again.

What is my Motorola router username and password?

By default, the username is admin, and the password is motorola.

Why can’t I log into my Motorola router?

FIRST solution: Always power cycle your modem and router first, and then try logging into your modem again. If you have a router between your computer and modem, remove it and directly connect the computer to the modem via an Ethernet cable.

What does WPS mean on a router?

Wi-Fi® Protected Setup
IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details. Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network.

How do I know if my modem is bad?

Signs that You Need to Replace Your Modem

1. The modem won’t turn on.
2. You can’t connect to the internet at all.
3. Internet connection drops in and out randomly.
4. Internet speed is inconsistent or is consistently slower than it used to be.
5. You frequently need to reset the modem to get it functioning properly.

How do I find Internet settings?

Answer:

1. Tap the Menu button.
2. Tap Settings.
3. Tap Wireless and Networks or More (depending on the version of the Android device)
4. Tap Mobile Networks.
5. Tap Access point names.
6. Tap the Menu button.
7. Tap New APN.
8. Enter the following data without changing any other settings:

Why can’t I access my modem settings?

The reason you can’t reach the modem, is because the IP address of the modem is on the same network as your LAN, but isn’t connected to the LAN (its connected to the WAN). The easy fix, if you can’t change your modem IP, is to change your LAN IP range. Use something like 192.168. 0.0/255 instead of 192.168.

How do I test my modem?

To verify that your modem is functioning properly, use the following procedure to test for problems.

1. Run the handshake test.
2. Run the handshake test again.
3. If the handshake test is successful, run the offhook test.
4. Perform the offhook test again.
5. If either the handshake or the offhook test fails again, reset the modem.